Chevy Silverado/Sierra 2000-2006 SS 1500 , 1500HD & 2500HD w/ 6.0 or 8.1 V8 customizable Direct Fit Dual Exhaust Kit

SKU:
HD0006
Availability:
Usually ships in 48 hours
$269.99
(11 reviews) Write a Review
Condition:
New
Current Stock:

Chevrolet Silverado / GMC Sierra. All Wheel Bases. 

Fits years 2000-2006 SS Silverado & 3/4 ton Chevy Full size trucks with a 6.0 or 8.1 Liter V8 Gas Engine (with a dual 3" inlet factory muffler) 

 

Our Kits will convert your single exhaust system to a dual exhaust system with a performance muffler that will give your truck the look, sound and performance you have been searching for! Our kits are fully customizable so you control how much you spend. Our kits are easy to install , Most jobs take 1 afternoon and basic hand tools. The aluminized steel 2 -piece tail pipes make for easy installation. 

 

Fits regular, extended or quad cab trucks. Fits long or short beds.

 

Designed to fit. These kits are designed to fit around your spare tire as well as your hitch!

  • Performance muffler (of your choice)
  • Two 2.5" pre-bent tail pipes that have been mandrel bent in either aluminized or stainless 
  • Features mandrel bent tubing for higher flow, longer life, and a better tone!!!!
  • Clamps, hangers, hardware & necessary adaptors included
     
     
     
    Muffler options:

Flowmaster 50 Series "Big Block"

flo-530504-km-m.jpg

Flowmaster's new 50 series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 series mufflers, and significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology, with the performance sound and feel that Flowmaster is famous for.

 
Magnaflow Stainless
 
mpe-12569-w-s.jpg
These MagnaFlow performance mufflers are designed to give you more power and provide excellent sound. They feature a large-diameter, perforated stainless steel core and a straight-through design for unrestricted flow. They also have a stainless steel mesh for sound control, and all-welded, lap-jointed contacts to avoid distortion or cracking at the seams.
         
 
wrinklevsmandrel.jpg 


 

Reviews

  • 5
    Awesome!

    Posted by Stuart A Jordan on 02/6/2018

    5 Stars for sure. One thing that they need to put is that the magnaflow true X muffler is a dual in dual out. If the kit said I missed it and was nervous but very happy when a dual in dual out arrived. This kit went together in about 2 hours including mig welding all joints. Snugly clamp the pipes, use baling wire or a jack stand to help get your height and angles correct and have at it. Very simple. I would highly recommend this kit to anyone. Its so quiet at idle but still has a very, very low rumble but when you mash the go pedal... WOW, my buddies were extremely impressed by how aggressive it sounded under hard acceleration. Best of all the noise level in the cab we perfect. Almost too quiet but i'm not 19 anymore and like to hear my wife when we talk on a trip. Read some reviews that said the true X Muffler could take up to 500 miles to break in... I have just over a thousand miles on truck since install and still sounds the same. All in all my only regret was not getting this kit when my flowmasters began to rust apart last year...

  • 5
    Great product, easy install

    Posted by Mitchell on 02/1/2018

    I was a little sceptical buying this because my truck is a regular cab, 8ft bed but I was was very happy with how it fit. I only had to add in about 5 inches in one of the driver side pipes because my hitch framing drops down pretty far so I added the pipe so that the exhaust exit would move wider. Other than that, I was able to put it in in about 6 hours and it sounds great. I paired the exhaust with the Magnaflow option and I love the sound.

  • 5
    great stuff

    Posted by dave on 09/8/2016

    everything fits well and looks great, easy to install, very satisfied

  • 4
    1500HD 6.0 crewcab exhaust w/Magnaflow muffler

    Posted by Unknown on 03/4/2016

    Replaced stock exhaust from muffler back. The fit was perfect, but a little tricky around passenger side shock. My silverado only had 2.75 inch stock exhaust, so had to sleeve muffler connection and weld. Everything I read said it was 3.00 inch, but no. Great price for system, saved over 400 from other retailers, but savings went for installation at a garage.

  • 4
    Great Truck Exhaust Option

    Posted by Ron Bush on 01/5/2016

    This was a 409SS Mandrel Bend System w/X-flow SS muffler. Exhaust arrived when expected. Pipe mandrel bends were very nice. Overall fit on truck was good. Only one bend off slightly and needed to be cut and rewelded. Not a problem as this was to be a fully welded on system. I wish I could order custom 409SS adapter pipe sections for connections to exisiting convertor pipes. Installation shop was able to provide these in 409SS. Also would like option for SS hanger hardware instead of standard steel, which were rusting in box as arrived. I opted for installtion shop to use 316SS materials and make all hanger hardware.

  • 5
    Best priced exhaust

    Posted by Jeff on 08/7/2014

    Replaced my Magnaflow on my 8.1 Silverado 2500 HD. Sound is much tamer in the cab with the bitchin' sound out back. Went with the Flowmaster dual out back. Saved a least 500 bucks

  • 5
    Dual Tailpipes

    Posted by Unknown on 07/10/2014

    I had a hard time finding dual tailpipes for my year/model pickup. I ordered the kit without a muffler and I am very happy that everything fit as it should. The kit had plenty of clamps and hangers to get the job completed and all of the pipes fit perfect.

  • 5
    Dual Exhaust KIT 2006 2500 HD 6.0

    Posted by Unknown on 03/19/2014

    Exhaust pipes fit perfect, bought without muffler, but wish I would have got the complete kit, so that I would have got all the adapters that I had to buy anyway. But overall very satisfied.

  • 3
    1500hd dual exhaust

    Posted by tyler on 03/11/2014

    Great sound, I was a little disappointed that when ordering the kit without mufflers it ends up short and your on your own to get metearals to finish it out. I ordered my kit with 90° exit option and because of the bends going over the Axel I couldn't get it to exit as far to the front as I would like.otherwise the quality and directions were great and I am overall pleased with the end results.I was also pleased with the price and fast shipping.