Chevy Silverado/Sierra 1988-1995 Customizable Direct Fit Dual Exhaust Kit

SKU:
GF8895
$189.99
(25 reviews) Write a Review
Condition:
New
Current Stock:

Chevrolet Silverado / GMC Sierra. All Wheel Bases. 6 or 8 cyl

Fits years 1988-1995-1/2 ton Chevy Full size trucks

 

Our Kits will convert your single exhaust system to a dual exhaust system with a Performance muffler that will give your truck the look, sound and performance you have been searching for !! Our kits are fully customizable so you control how much you spend. Our kits are easy to install , Most jobs take 1 afternoon and basic hand tools . aluminized steel 2 -piece tail pipes make for easy installation. (They are will go around the Factor trailer hitch & spare so no tire removal is necessary.) 

 

 

This includes a name brand performance muffler  (of your choice) with Two prebent aluminized steel tail pipes. Fits regular, extended or quad cab trucks. Fits long or short beds.

This auction consists of the following:

  • Performance muffler (of your choice)
  • Two prebent, aluminized steel tailpipes. most trucks can choose between mandrel bent  or wrinkle bend as well as 2.25" or 2.5" 
  • Features mandrel bent tail pipes for higher flow !!!!
  • Clamps, Hangers, hardware & necessary adaptors included
     
     
     
    Muffler options :
     
    Cherry Bomb Extreme 
     
    imm-7427-w-s.jpg
     
    Cherry Bomb Extreme mufflers Cherry Bomb Extreme mufflers feature a unique wing plate design that emphasizes exhaust flow over sound control. These 100 percent welded mufflers are constructed from aluminized steel and finished with a high-temperature gray coating for durability. Cherry Bomb Extreme mufflers are non-reversible due to their custom-tuned flow design and are intended for off-road and racing applications.
     
    Cherry Bomb Vortex mufflers
     
    vortex.jpg
    Cherry Bomb Vortex mufflers feature a patented flow divider design with high-temperature fiberglass packing that increases exhaust flow and adds an aggressive exhaust note. These are 100 percent welded, black aluminized steel mufflers. Cherry Bomb Vortex mufflers are perfect for adding a more aggressive sound to your car, truck, or SUV.
    Cherry Bomb Pro mufflers
     
    imm-7421-w-s.jpg
     
    Cherry Bomb Pro mufflers feature a unique wing plate design that improves your exhaust system's flow and sound characteristics. These 100 percent welded mufflers are constructed from aluminized steel and finished with a high-temperature gray coating for durability. Cherry Bomb Pro mufflers are non-reversible due to their custom-tuned flow design, and their standard body size allows them to work with most car and truck applications.
     
    40 series Flowmaster mufflers
     
    flowmaster-40.jpg
     
    Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these Flowmaster mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you've gotta get these Flowmaster mufflers.
    Flowmaster Super 44 mufflers
     
    super44.jpg
    Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers. The Super 44 mufflers deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Flowmaster's Delta Flow technology. The Super 44s are the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. They are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then these Super 44 Flowmaster mufflers are for you.
    Super 40 Flowmaster mufflers
     
    flowmaster-super-40.jpg
     
    These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers, with a classic black case. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
    Flowmaster's 50 series Delta Flow muffler
     
    flowmaster-50.jpg
    Flowmaster's new 50 series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 series mufflers, and significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology, with the performance sound and feel that Flowmaster is famous for.
    Flowmaster Super 10 series mufflers
     
    super-10.jpg
     
    These Flowmaster Super 10 series mufflers are intended for customers who desire the loudest and most aggressive sound they can find. They are manufactured from 16-gauge, MIG-welded 409 stainless steel and feature the same patented Delta Flow technology that is found in Flowmaster's other Super series mufflers to deliver maximum performance. The Flowmaster Super 10 series mufflers are intended only for off-road or race applications using mufflers.
    MagnaFlow XL 3 chamber mufflers
     
    magnaflow.jpg
    MagnaFlow XL 3 chamber mufflers use a unique combination of large-diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower. The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds. The large-diameter perforated core eliminates the flow restrictions of a louvered-style core. A careful balance between perforation size/spacing and the baffle tuning gate makes for great 3-chamber performance mufflers.
    Flowsound 2 chamber mufflers
    flowmaster-40.jpg
    These mufflers will look and sound just like the more expensive competitor . They are constructed from the same 14 ga aluminized material but cost just a fraction as much . 
    Flowsound 1 Chamber Mufflers
    flowsound-1-chamber.jpg
    These little guys are very loud , They sound just like the major competitors 1 chamber muffler but without the expense ! 
Pipe options :                    
 
2-25-vs-2-50.jpg
mandrel-comparison-64379-zoom.jpg 


 


 

Reviews

  • 5
    Excellent home builder option for an exhaust

    Posted by David Martinez Jr on 01/22/2022

    This kit is an absolute for anyone that is an avid hobbyist, or weekend warrior mechanic that wants to add to, or just repair their old rusted out exhaust. All the sections are labeled so there is no confusion, plenty of hardware supplied as well to complete the installation. The slip fit sections make it easy to assemble piece by piece under the truck and get all the angles right. I opted to tack weld mine in mock up, then remove to do a final weld on all seams and just use the hangers to mount under the truck.

  • 5
    93 Chevy dual exhaust

    Posted by Dave on 12/20/2021

    Very good fit, quality materials.

  • 4
    Decent kit for the money

    Posted by Unknown on 08/8/2017

    The exhaust kit was pretty well made, and came with lots of clamps, heavy duty hangers, and hardware. Shipping was really quick. I got the 2 1/4 system with no tips. The outlets on the supplied muffler were 2 1/2, which made getting a leak proof seal a little interesting, but I made it work. The worst thing I could say about it is the tailpipes are about a foot too short. I'm a little annoyed that I have to go buy additional pipe to clear the back bumper. All in all, it's a great deal for people who don't mind getting their hands dirty, and the price can't be beat. The truck sounds pretty nice, too.

  • 4
    88-98 C/K 1500 exhaust

    Posted by Mike Nadeau on 07/18/2016

    Quality kit , with all parts , including , hangers , clamps , and even all the bolts you'll need . Very happy with the kit , the only downfall would be that the pipes should be welded at the joints , because just clamping the is not good enough , they are still loose and will move , not a big deal , but something to remember.

  • 3
    nice exhaust

    Posted by wayne on 07/15/2016

    first let me say fast ship and packaged well the bad came in several pieces the way its made is not what I expected they make the pipe then tag then cut and flair I would have left it one piece also the drivers side was a royal pain had to remove the tire and the tail pipe was 8 inches shorter than the pass side not bad if you bought the tips like I did also the tips the holes were to small had to grind do they would fit overall its an ok kit I welded all mine so I could fudge it here and there to look right will not buy again

  • 2
    The product is decent- customer service? hahahahahaha

    Posted by Craig Powers on 05/10/2016

    Make no mistake, it's a quality product, however, my kit had no reducer or connector, therefore a trip to the parts store and further expenditure. Also, there was no paperwork or diagram. Of course all of this was discovered after I cut off my old exhaust. Worked my way through the puzzle and am ok with the product as mentioned. Despite numerous emails and messages through their system and Facebook no help was offered as promised. (Posts were removed from FB.) Searches on Google regarding public reviews reveals they spend a lot of time removing them (I expect this one will be removed as well.). Seems to me they should spend more time on service than ass covering.

  • 5
    Great product

    Posted by AUSTIN J WLOCK on 04/5/2016

    Can't be more pleased with the product I've received. It got here reasonably quick, It wasn't damaged at all. It sounds great on my 95 Silverado.

  • 4
    Amazing prices!

    Posted by Chris New Sr. on 07/27/2015

    The fit was great but there was an error In the muffler. The inlet side was 3 inches and my exhaust is 2 .25 , so I had to fabricate a reducer to make it work. What I believe happened is the kit was set for my model truck with a V-8 when I have a 6. The small error is fixed easily and I'm still happy with not only the end results but also the money I saved. Thank You

  • 5
    awesome duals

    Posted by jared on 06/8/2015

    Looks great on the truck. Very easy to install. Best of all price was very reasonable and they sound GREAT!