Dodge Ram 2009-2014 Customizable Direct Fit Dual Exhaust Kit

(17 reviews) Write a Review
Current Stock:

Dodge Ram. All Wheel Bases. 6 or 8 cyl

Fits years 2009-2014 

Our Kits will convert your single exhaust system to a dual exhaust system with a Performance muffler that will give your truck the look, sound and performance you have been searching for !! Our kits are fully customizable so you control how much you spend. Our kits are easy to install , Most jobs take 1 afternoon and basic hand tools . aluminized steel 2 -piece tail pipes make for easy installation. (They are will go around the Factor trailer hitch & spare so no tire removal is necessary.) 



This includes a name brand performance muffler  (of your choice) with Two prebent aluminized steel tail pipes. Fits regular, extended or quad cab trucks. Fits long or short beds.

This auction consists of the following:

  • Performance muffler (of your choice)
  • Two prebent, aluminized steel tailpipes. most trucks can choose between mandrel bent  or wrinkle bend as well as 2.25" or 2.5" 
  • Features mandrel bent tail pipes for higher flow !!!!
  • Clamps, Hangers, hardware & necessary adaptors included
    Muffler options :
    Cherry Bomb Extreme 
    Cherry Bomb Extreme mufflers Cherry Bomb Extreme mufflers feature a unique wing plate design that emphasizes exhaust flow over sound control. These 100 percent welded mufflers are constructed from aluminized steel and finished with a high-temperature gray coating for durability. Cherry Bomb Extreme mufflers are non-reversible due to their custom-tuned flow design and are intended for off-road and racing applications.
    Cherry Bomb Vortex mufflers
    Cherry Bomb Vortex mufflers feature a patented flow divider design with high-temperature fiberglass packing that increases exhaust flow and adds an aggressive exhaust note. These are 100 percent welded, black aluminized steel mufflers. Cherry Bomb Vortex mufflers are perfect for adding a more aggressive sound to your car, truck, or SUV.
    Cherry Bomb Pro mufflers
    Cherry Bomb Pro mufflers feature a unique wing plate design that improves your exhaust system's flow and sound characteristics. These 100 percent welded mufflers are constructed from aluminized steel and finished with a high-temperature gray coating for durability. Cherry Bomb Pro mufflers are non-reversible due to their custom-tuned flow design, and their standard body size allows them to work with most car and truck applications.
    40 series Flowmaster mufflers
    Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these Flowmaster mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you've gotta get these Flowmaster mufflers.
    Flowmaster Super 44 mufflers
    Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers. The Super 44 mufflers deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Flowmaster's Delta Flow technology. The Super 44s are the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. They are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then these Super 44 Flowmaster mufflers are for you.
    Super 40 Flowmaster mufflers
    These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers, with a classic black case. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
    Flowmaster's 50 series Delta Flow muffler
    Flowmaster's new 50 series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 series mufflers, and significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology, with the performance sound and feel that Flowmaster is famous for.
    Flowmaster Super 10 series mufflers
    These Flowmaster Super 10 series mufflers are intended for customers who desire the loudest and most aggressive sound they can find. They are manufactured from 16-gauge, MIG-welded 409 stainless steel and feature the same patented Delta Flow technology that is found in Flowmaster's other Super series mufflers to deliver maximum performance. The Flowmaster Super 10 series mufflers are intended only for off-road or race applications using mufflers.
    MagnaFlow XL 3 chamber mufflers
    MagnaFlow XL 3 chamber mufflers use a unique combination of large-diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower. The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds. The large-diameter perforated core eliminates the flow restrictions of a louvered-style core. A careful balance between perforation size/spacing and the baffle tuning gate makes for great 3-chamber performance mufflers.
    Flowsound 2 chamber mufflers
    These mufflers will look and sound just like the more expensive competitor . They are constructed from the same 14 ga aluminized material but cost just a fraction as much . 
    Flowsound 1 Chamber Mufflers
    These little guys are very loud , They sound just like the major competitors 1 chamber muffler but without the expense ! 
Pipe options :                    




  • 5
    2011 Ram 1500 / Flowmaster 40 Series

    Posted by Adam on 10/24/2016

    I bought this kit last week, and it arrived this past Saturday, so from order to arrival - 3 days. It arrived in good condition with only one small dent in one of the pipes. No big deal, as it was in the adapter pipe which gets trimmed anyway. Install time was about 3 hours, and that was being by myself working on the garage floor, so with an extra set of hands, or a lift, this could easily be cut in half. The pipes were bent perfectly, and the look and sound on the truck is amazing. I went with the Flowmaster 40 series, 2.5" mandrel bent pipes and slash cut tips, and I am so happy I did. Note to other Dodge owners, there are no good holes in the frame, so a new hole for mounting the hangers is needed. This states this in the instructions, but who read those, right? The instructions themselves are quite basic, more of helpful tips, but in reality, if you need detailed instruction for something like this, you probably should not be around power tools anyway. Take it to a shop.

  • 5
    2015 RAM 1500 Hemi Super-10

    Posted by Unknown on 08/11/2016

    I have put FLOWMASTER Super 10 series on all of my trucks. They aren't as loud as straight pipes but they are perfect for the HEMI. products are always packaged well and the install is simple if it's not your first time. Even though they supply hangers and clamps I recommend welding everything to prevent leaks, unwanted noises and peace of mind. All around great products highly recommend.

  • 5

    Posted by Iceman44 on 02/21/2016

    Rather easy install. Drivers side tailpipe required a 2.5in coupler/extension. I am extremely happy with this product. Added my own tips and am impressed with my performance gain. A little loud upon takeoff, but mellows out in cruise mode. Excellent product for the price!

  • 5
    Great price and quality I'm gonna be ordering another one for my 2003 ram

    Posted by Tracy Burnett on 05/26/2015

    Great product awesome deal will do more business

  • 5
    Out standing exhaust

    Posted by John on 01/27/2015

    I will definitely buy from here again great stuff

  • 5
    Flowmaster super 44

    Posted by Josh Brinkley on 04/14/2014

    I have a 2010 Dodge ram 1500 crew cab 5.7L TRX. I got my kit in 4 days. It took around 3 hours to remove/install the new exhaust due to rusted bolts/clamps. I'm only using the clamps for now because i plan to weld it together at a later date. It was easy to put together and all the pipes went right where they needed to. It looks great on the truck, and the slash cut tips look great from the back. It was not as loud as i thought it was going to be. It sounds GREAT. It has that nice low rumble that people love. I was concerned when i first bought it because i was reading reviews where one person said that every time they started their truck it set their neighbor's car alarm off, or another where it would set an alarm off while driving down the road. It is not that loud just loud enough for everyday driving, it just made my truck loud enough to hear that low growl and make me smile everytime i turn that key. I would definitely buy this kit again if i needed one. Great price for a great product.

  • 4
    very easy

    Posted by joey d on 03/25/2014

    Very easy to install. A little tricky as far as hanging since there are virtually no punch outs in the 2013 frame, but it sounds awesome and only took 2 hours to install.

  • 5
    Fowmaster 40 series

    Posted by Matt on 05/30/2013

    Awesome product! Even better price! I got the flowmaster 40 series with wrinkle bent pipes on my 2011. I wish i would have sprung for the mandrel bends but it still sounds great. Not so loud that im going to piss any body off but its got a great tone. It took me just about an hour and a half to install. Very easy installation.

  • 5
    flowsound cat back

    Posted by Unknown on 05/21/2013

    Was very easy to install about 2 hours the flowsound muffler sounds as good as the flowmaster would buy this kit again